| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.20/+0.20 ALL SECTIONS |
| AEFK |
MAXIMUM STARTING TORQUE |
0.125 INCH-OUNCES |
| AXGY |
MOUNTING METHOD |
CLAMP RING AND THREADED HOLE |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
90.0 |
| ABHP |
OVERALL LENGTH |
1.531 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| AFJN |
FRAGILITY FACTOR |
MODERATELY DELICATE |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 2ND SECTION |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
120.0 |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| ADAQ |
BODY LENGTH |
1.031 INCHES MAXIMUM |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| ADAV |
OVERALL DIAMETER |
1.500 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.500 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
0.437 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+7.0 1ST SECTION |
| ABPM |
BODY DIAMETER |
1.093 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 ALL SECTIONS |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-650.0/+650.0 ALL SECTIONS |
| ABPA |
UNDERCUT DIAMETER |
1.0025 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
353.0 NOMINAL |
| AAVL |
PILOT DIAMETER |
1.0300 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.086 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.500 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEDA |
MOUNTING LIP DEPTH |
0.0600 INCHES NOMINAL |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
56.0 |
| AECZ |
MOUNTING LIP DIAMETER |
1.0930 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 HEAT SINK ALL SECTIONS |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| AAVM |
PILOT LENGTH |
0.0400 INCHES NOMINAL |