| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TURRET |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.687 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
352.0 NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| AAVL |
PILOT DIAMETER |
1.8750 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.0 KILOHMS SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
8.0 FREE AIR SINGLE SECTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFK |
MAXIMUM STARTING TORQUE |
1.500 INCH-OUNCES |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES MAXIMUM |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
176.0 SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| ABPA |
UNDERCUT DIAMETER |
1.875 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| FEAT |
SPECIAL FEATURES |
HOLE THROUGH SHAFT 0.097 IN. MAX DIA. LOCATED 0.155 IN. FROM END OF SHAFT |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ADAQ |
BODY LENGTH |
0.725 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-0.5/+0.5 DEG ANGULAR ROTATION SINGLE SECTION |
| AEGA |
LATERAL RUNOUT |
0.005 INCHES |