| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.700 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| ABHP |
OVERALL LENGTH |
1.312 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABTB |
MOUNTING HOLE DIAMETER |
0.093 NOMINAL INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-20.0/+20.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
9000.0 NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
8.00 INCH-OUNCES |
| ABXF |
SHAFT LENGTH |
0.062 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.250 INCHES NOMINAL |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.300 NOMINAL INCHES |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ABJT |
TERMINAL LENGTH |
0.594 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AEFK |
MAXIMUM STARTING TORQUE |
8.00 INCH-OUNCES |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
+0.0/+1.5 0 DEG CELSIUS SINGLE SECTION AND -2.0/+2.0 85 DEG CELSIUS SINGLE SECTION AND +0.0/+5.5 -55 DEG CELSIUS SINGLE SECTION AND +0.0/+3.0 -25 DEG CELSIUS SINGLE SECTION AND +0.0/+4.5 125 DEG CELSIUS SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1250 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
TERMINAL AND UNTHREADED HOLE |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| CBME |
CUBIC MEASURE |
0.112 CUBIC INCHES |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.359 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.25 7TH SECONDARY QUALITY |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |