| ABTB |
MOUNTING HOLE DIAMETER |
0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
15.0 KILOHMS SINGLE SECTION |
| AAPN |
SECTION QUANTITY |
1 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
9000.0 NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAU |
BODY HEIGHT |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.395 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.5 FREE AIR SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-60.0/+60.0 SINGLE SECTION |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| APXH |
TERMINAL LOCATION |
ALL ADJACENT SIDES FROM ADJACENT CONTROL |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AEEZ |
CONTACT ARM ELECTRICAL OFF POSITION |
FULLY CW |
| ABKW |
OVERALL HEIGHT |
0.770 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
50.0 SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
190.0 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.060 INCHES NOMINAL |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |