| ABPA |
UNDERCUT DIAMETER |
1.9375 INCHES MINIMUM AND 1.9395 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.0270 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
2.000 NOMINAL INCHES |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| AEFY |
SHAFT END PLAY |
0.006 INCHES |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
3 SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0270 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| AEDA |
MOUNTING LIP DEPTH |
0.0270 NOMINAL MILS AND 0.0320 NOMINAL CENTIMETERS |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
175.0 SINGLE SECTION AND 115.0 SINGLE SECTION AND 235.0 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-150.0/+150.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 TURRET |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.0 7TH SECONDARY QUALITY |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.60 INCH-OUNCES |
| ADAQ |
BODY LENGTH |
0.963 INCHES MINIMUM AND 0.973 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
DRIVE COUPLING ON SHAFT |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
80.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
0.60 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.938 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION TERMINAL BASE LINEARITY |
| AAVL |
PILOT DIAMETER |
1.9350 INCHES MINIMUM AND 1.9370 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |