| ABXF |
SHAFT LENGTH |
0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.093 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-27208 SPECIFICATION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 FREE AIR SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.0 OHMS SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.170 INCHES NOMINAL |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.295 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ADAT |
BODY WIDTH |
0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION |
| ABWV |
SHAFT DIAMETER |
0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |