| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TEST |
TEST DATA DOCUMENT |
06481-914035 DRAWING |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TURRET |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
1800.0 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
0.531 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.30 INCH-OUNCES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.5 FREE AIR SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.690 INCHES NOMINAL |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 KILOHMS SINGLE SECTION |
| AAVL |
PILOT DIAMETER |
0.4000 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
0.40 INCH-OUNCES |
| AEGB |
PILOT DIAMETER RUNOUT |
0.002 INCHES |
| AEDA |
MOUNTING LIP DEPTH |
0.0310 INCHES NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AECZ |
MOUNTING LIP DIAMETER |
0.5310 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.094 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
1.5 |
| ABWV |
SHAFT DIAMETER |
0.0932 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
0.531 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.6200 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AAVM |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |