| ABWV |
SHAFT DIAMETER |
0.2499 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TURRET |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
30.0 KILOHMS SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEGC |
SHAFT RADIAL PLAY |
0.001 INCHES |
| ABPM |
BODY DIAMETER |
1.3125 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.5 FREE AIR SINGLE SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TEST |
TEST DATA DOCUMENT |
80249-730251 DRAWING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
0.312 INCHES MAXIMUM |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
58.2 SINGLE SECTION |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
1.3125 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.100 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFK |
MAXIMUM STARTING TORQUE |
0.06 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AECZ |
MOUNTING LIP DIAMETER |
1.4370 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION TERMINAL BASE LINEARITY |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS SINGLE SECTION |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |
| AEDA |
MOUNTING LIP DEPTH |
0.0730 INCHES MINIMUM |