| ADAQ |
BODY LENGTH |
1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MILR22097-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
6120.0 MINIMUM AND 9710.0 MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
6120.0 MINIMUM AND 9720.0 MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.036 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.312 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ABTB |
MOUNTING HOLE DIAMETER |
0.088 NOMINAL MILS AND 0.098 NOMINAL CENTIMETERS |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.290 NOMINAL MILS AND 0.310 NOMINAL CENTIMETERS |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AEFK |
MAXIMUM STARTING TORQUE |
8.00 INCH-OUNCES |
| ABHP |
OVERALL LENGTH |
1.300 INCHES NOMINAL |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ADAT |
BODY WIDTH |
0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ABMK |
OVERALL WIDTH |
0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABKW |
OVERALL HEIGHT |
0.749 INCHES MINIMUM AND 0.998 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
0.469 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |