| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-3.0/+3.0 OHMS 2ND SECTION |
| AEDX |
SHAFT STYLE |
ROUND |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 7TH SECONDARY FINISH |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| ABPM |
BODY DIAMETER |
1.094 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
2 |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY PATTERN |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 2ND SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABJT |
TERMINAL LENGTH |
0.390 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A 1ST SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 1ST SECTION |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
15000.0 2ND SECTION |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
S 2ND SECTION |
| ADAQ |
BODY LENGTH |
1.304 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.764 INCHES MINIMUM AND 2.359 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
309.0 MINIMUM AND 320.0 MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
309.0 MINIMUM AND 320.0 MAXIMUM |
| ADAV |
OVERALL DIAMETER |
1.874 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TAB, SOLDER LUG |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 2ND SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |