| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 2ND SECTION |
| ADAV |
OVERALL DIAMETER |
2.200 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
2.312 INCHES MAXIMUM |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AAVL |
PILOT DIAMETER |
0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
1.00 INCH-OUNCES |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
120.0 |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-12934/22 GOVERNMENT SPECIFICATION |
| AAPN |
SECTION QUANTITY |
2 |
| AAVM |
PILOT LENGTH |
0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.164 INCHES NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
308.5 MINIMUM AND 330.0 MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
5.0 7TH SECONDARY FINISH |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 ALL SECTIONS |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.1 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.7 7TH SECONDARY PATTERN |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
1.250 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
1.875 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
THREADED HOLE |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ABHP |
OVERALL LENGTH |
3.067 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 1ST SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-12934 SPECIFICATION |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
30.0 |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |