| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
10000.0 SINGLE SECTION |
| AEFZ |
SHAFT RUNOUT |
0.020 INCHES |
| AEEA |
SWITCH TYPE |
ROTARY |
| AAPN |
SECTION QUANTITY |
1 |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
1.00 INCH-OUNCES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-70.0/+70.0 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
350.0 MINIMUM AND 354.0 MAXIMUM |
| ADAQ |
BODY LENGTH |
2.000 INCHES NOMINAL |
| ADAP |
MOUNTING BUSHING LENGTH |
0.380 INCHES NOMINAL |
| AEED |
SWITCH VOLTAGE RATING IN VOLTS |
28.0 |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-500.0/+500.0 OHMS SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| ABPM |
BODY DIAMETER |
1.437 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| AEGH |
SWITCH OPERATING POSITION |
START OF ROTATION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-1.00/+1.00 SINGLE SECTION |
| AEFY |
SHAFT END PLAY |
0.01000 INCHES |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| CSDK |
SWITCH CURRENT TYPE AND RATING IN AMPS |
0.100 DC |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TAB W/SCREW |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEGJ |
SWITCH CONTACT ARRANGEMENT |
SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 FREE AIR SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFM |
MAXIMUM STOP TORQUE |
80.00 INCH-OUNCES |
| FEAT |
SPECIAL FEATURES |
W/SPECIAL FEATURES FOR PROPER FUNCTIONING OF THE ITEM |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEGC |
SHAFT RADIAL PLAY |
0.010 INCHES |
| ABWV |
SHAFT DIAMETER |
0.249 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.25 |
| ABHP |
OVERALL LENGTH |
2.850 INCHES MINIMUM AND 2.910 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
351.0 MINIMUM AND 353.0 MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
1.437 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.000 KILOHMS SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |