| AAPN |
SECTION QUANTITY |
1 |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-70.0/+70.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ADAT |
BODY WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.0 OHMS SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABHP |
OVERALL LENGTH |
1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ABKW |
OVERALL HEIGHT |
0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABTB |
MOUNTING HOLE DIAMETER |
0.088 INCHES MINIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 FREE AIR SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |