| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| AAPN |
SECTION QUANTITY |
1 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.280 INCHES MINIMUM AND 1.344 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.468 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABTB |
MOUNTING HOLE DIAMETER |
0.086 INCHES MINIMUM |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
7.50 INCH-OUNCES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ABXF |
SHAFT LENGTH |
0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.312 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AEEZ |
CONTACT ARM ELECTRICAL OFF POSITION |
FULLY CW |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |