| ABWV |
SHAFT DIAMETER |
0.030 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.083 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
9000.0 NOMINAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY NAVORD OD44548 |
| ABMK |
OVERALL WIDTH |
0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
MTG HOLES LOCATED DIAGONALLY OPPOSITE ON PLANE FORMED BY LG AND W,PIN-DIA 0.028 IN. |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES MINIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| ADAQ |
BODY LENGTH |
0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
LEFT ADJACENT SIDE SINGLE ROW |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |