| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.700 NOMINAL INCHES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.093 NOMINAL INCHES |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
1.308 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
8.00 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ADAT |
BODY WIDTH |
0.190 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9720.0 NOMINAL |
| CBME |
CUBIC MEASURE |
0.075 CUBIC INCHES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.315 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABKW |
OVERALL HEIGHT |
0.815 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.190 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.115 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
10001-2237841 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AEFK |
MAXIMUM STARTING TORQUE |
8.00 INCH-OUNCES |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.058 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.8 7TH SECONDARY QUALITY |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
9720.0 MAXIMUM |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.900 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |