| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
90.0 |
| AAPN |
SECTION QUANTITY |
1 |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
0.625 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
1.047 INCHES NOMINAL |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.312 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
35.0 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS SINGLE SECTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
1.065 INCHES MINIMUM AND 1.085 INCHES MAXIMUM |
| AEDZ |
SHAFT BEARING TYPE |
ROLLER |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| ABNB |
FIRST FLAT LENGTH |
0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABPC |
UNDERCUT WIDTH |
0.0680 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
1080.0 NOMINAL |
| ABNC |
FLAT HEIGHT |
0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.50 INCH-OUNCES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
1080.0 NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.002 INCHES |
| AEFK |
MAXIMUM STARTING TORQUE |
0.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AECZ |
MOUNTING LIP DIAMETER |
0.8750 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
0.625 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 SOLDER STUD |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
66.0 |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 FREE AIR SINGLE SECTION |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |