| ABPC |
UNDERCUT WIDTH |
0.07300 INCHES MINIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| TEST |
TEST DATA DOCUMENT |
81349-MILR12934 SPECIFICATION |
| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.00500 INCHES |
| AEDX |
SHAFT STYLE |
ROUND |
| AEFK |
MAXIMUM STARTING TORQUE |
2.50 INCH-OUNCES |
| AAVL |
PILOT DIAMETER |
2.87500 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.06200 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
2 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.5 7TH SECONDARY PATTERN |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 ALL SECTIONS |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-12934/5 GOVERNMENT SPECIFICATION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 KILOHMS ALL SECTIONS |
| ADAQ |
BODY LENGTH |
2.187 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AECZ |
MOUNTING LIP DIAMETER |
3.00000 INCHES NOMINAL |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.1 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABPA |
UNDERCUT DIAMETER |
2.875 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.80 INCH-OUNCES |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| AEDA |
MOUNTING LIP DEPTH |
0.09300 INCHES NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 ALL SECTIONS |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
6.0 7TH SECONDARY FINISH |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 ALL SECTIONS |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
3.031 INCHES MAXIMUM |