| ABHP |
OVERALL LENGTH |
1.203 INCHES MINIMUM AND 1.423 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| ABPM |
BODY DIAMETER |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-22/1 GOVERNMENT SPECIFICATION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
340.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.625 INCHES MINIMUM AND 0.751 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEFN |
NONTURN DEVICE LOCATION |
AT 6 OCLOCK |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFP |
NONTURN DEVICE RADIUS |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| ADAV |
OVERALL DIAMETER |
0.984 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
12.5 HEAT SINK SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFM |
MAXIMUM STOP TORQUE |
80.00 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-22 SPECIFICATION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
150.0 OHMS SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
LOCKING BUSHING |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
290.0 MINIMUM AND 305.0 MAXIMUM |
| ADAP |
MOUNTING BUSHING LENGTH |
0.453 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |