| ABXF |
SHAFT LENGTH |
0.937 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TEST |
TEST DATA DOCUMENT |
19315-2132071 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
36.0 KILOHMS SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| ADAQ |
BODY LENGTH |
2.000 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.25/+0.25 SINGLE SECTION |
| ADAV |
OVERALL DIAMETER |
2.157 INCHES MAXIMUM |
| AEFP |
NONTURN DEVICE RADIUS |
0.562 INCHES NOMINAL |
| ADAP |
MOUNTING BUSHING LENGTH |
0.250 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
TERMINALS GOLD |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AEGC |
SHAFT RADIAL PLAY |
0.003 INCHES |
| AEFZ |
SHAFT RUNOUT |
0.0005 INCHES |
| AEGB |
PILOT DIAMETER RUNOUT |
0.002 INCHES |
| ABPM |
BODY DIAMETER |
1.812 INCHES NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| ABHP |
OVERALL LENGTH |
2.937 INCHES NOMINAL |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFL |
MAXIMUM RUNNING TORQUE |
3.00 INCH-OUNCES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
7.2 SINGLE SECTION AND 10.8 SINGLE SECTION AND 14.4 SINGLE SECTION AND 18.0 SINGLE SECTION AND 28.8 SINGLE SECTION AND 3.6 SINGLE SECTION AND 25.2 SINGLE SECTION AND 21.6 SINGLE SECTION AND 32.4 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
12 TAB, SOLDER LUG |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
9 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
3.00 INCH-OUNCES |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
5.0 FREE AIR SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
+0.0/+130.0 SINGLE SECTION |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-180.0/+180.0 OHMS SINGLE SECTION |
| AEGA |
LATERAL RUNOUT |
0.003 INCHES |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |