| AAPN |
SECTION QUANTITY |
1 |
| ADAQ |
BODY LENGTH |
0.415 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| ADAP |
MOUNTING BUSHING LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.500 7TH SECONDARY QUALITY |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-250.0/+250.0 SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
0.484 NOMINAL MILS AND 0.516 NOMINAL CENTIMETERS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
292.0 MINIMUM AND 298.0 MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
292.0 MINIMUM AND 298.0 MINIMUM |
| ABXF |
SHAFT LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
125.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-23285/3 GOVERNMENT SPECIFICATION |
| APXH |
TERMINAL LOCATION |
REAR END |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFP |
NONTURN DEVICE RADIUS |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-23285 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 4'30 OCLOCK AND AT 10'30 OCLOCK |