| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
540.0 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
1080.0 MINIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEFP |
NONTURN DEVICE RADIUS |
0.562 INCHES NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
1080.0 MINIMUM |
| ABXF |
SHAFT LENGTH |
0.812 INCHES NOMINAL |
| ADAP |
MOUNTING BUSHING LENGTH |
0.250 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| AEFZ |
SHAFT RUNOUT |
0.0005 INCHES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 KILOHMS SINGLE SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.002 INCHES |
| ADAQ |
BODY LENGTH |
1.141 INCHES NOMINAL |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
+0.0/+130.0 SINGLE SECTION |
| ABPM |
BODY DIAMETER |
1.812 INCHES NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEGC |
SHAFT RADIAL PLAY |
0.004 INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 FREE AIR SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFL |
MAXIMUM RUNNING TORQUE |
3.00 INCH-OUNCES |
| AEFM |
MAXIMUM STOP TORQUE |
350.00 INCH-OUNCES |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK |
| AEFK |
MAXIMUM STARTING TORQUE |
3.00 INCH-OUNCES |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| AEGA |
LATERAL RUNOUT |
0.003 INCHES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TAB, SOLDER LUG |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |