| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ADAU |
BODY HEIGHT |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
1440.0 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AXGY |
MOUNTING METHOD |
TERMINAL |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
200.0 OHMS C AND BETTER FLOORING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| ABKW |
OVERALL HEIGHT |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABJT |
TERMINAL LENGTH |
0.187 INCHES MINIMUM |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.100 NOMINAL INCHES |
| ADAQ |
BODY LENGTH |
0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
1440.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.200 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.300 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
3.00 INCH-OUNCES |
| ABMK |
OVERALL WIDTH |
0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| FEAT |
SPECIAL FEATURES |
IMMERSION SEALED |
| AAQL |
BODY STYLE |
RECTANGULAR W/POINTER ADJUSTMENT |
| CBME |
CUBIC MEASURE |
0.042 CUBIC INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 7TH SECONDARY QUALITY |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| AEFK |
MAXIMUM STARTING TORQUE |
3.00 INCH-OUNCES |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.080 INCHES NOMINAL |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 SINGLE SECTION |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |