| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
200.000 OHMS C AND BETTER FINISH |
| ADAQ |
BODY LENGTH |
1.326 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.08300 INCHES NOMINAL |
| AAVM |
PILOT LENGTH |
0.06200 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AAPN |
SECTION QUANTITY |
2 |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 ALL SECTIONS |
| AEGC |
SHAFT RADIAL PLAY |
0.0015 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
350.0 NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAVL |
PILOT DIAMETER |
1.87500 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
2.00000 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00200 INCHES |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.0 FREE AIR ALL SECTIONS |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABPA |
UNDERCUT DIAMETER |
1.875 INCHES MAXIMUM |
| AEFY |
SHAFT END PLAY |
0.00300 INCHES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEDA |
MOUNTING LIP DEPTH |
0.09300 INCHES NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.30/+0.30 1ST SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| AEGA |
LATERAL RUNOUT |
0.003 INCHES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.20/+0.20 2ND SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |