| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 7TH SECONDARY QUALITY |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.700 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| AFJN |
FRAGILITY FACTOR |
MODERATELY DELICATE |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABTB |
MOUNTING HOLE DIAMETER |
0.093 NOMINAL INCHES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
200.0 OHMS C AND BETTER FLOORING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
1.308 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
0.190 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CBME |
CUBIC MEASURE |
0.075 CUBIC INCHES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.315 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABKW |
OVERALL HEIGHT |
0.815 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.190 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.115 INCHES NOMINAL |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.300 NOMINAL INCHES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
0.100 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.058 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
TERMINAL AND UNTHREADED HOLE |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-39015/1 GOVERNMENT SPECIFICATION |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |