| AEFK |
MAXIMUM STARTING TORQUE |
0.70 INCH-OUNCES |
| ABPM |
BODY DIAMETER |
1.754 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
5000.0 SINGLE SECTION |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-300.0/+300.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TURRET |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
340.0 NOMINAL |
| AAVL |
PILOT DIAMETER |
1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
60.0 SINGLE SECTION |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| ADAQ |
BODY LENGTH |
0.962 INCHES MINIMUM AND 0.978 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00150 INCHES |
| AEFY |
SHAFT END PLAY |
0.00150 INCHES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.50 INCH-OUNCES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AECZ |
MOUNTING LIP DIAMETER |
1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 FREE AIR SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| AAVM |
PILOT LENGTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
1.595 INCHES MINIMUM AND 1.605 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS SINGLE SECTION |