| AEFL |
MAXIMUM RUNNING TORQUE |
0.20 INCH-OUNCES |
| AAPN |
SECTION QUANTITY |
1 |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
TERMINAL SURFACES GOLD |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AEFK |
MAXIMUM STARTING TORQUE |
0.20 INCH-OUNCES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.690 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| ABHP |
OVERALL LENGTH |
1.371 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| AEGC |
SHAFT RADIAL PLAY |
0.003 INCHES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 TURRET |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 7TH SECONDARY QUALITY |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ADAV |
OVERALL DIAMETER |
1.460 INCHES NOMINAL |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
90.0 SINGLE SECTION AND 180.0 SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
27934-113190 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AEFY |
SHAFT END PLAY |
0.003 INCHES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ADAQ |
BODY LENGTH |
0.681 INCHES NOMINAL |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ABWV |
SHAFT DIAMETER |
0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
1.062 NOMINAL INCHES |
| AXGY |
MOUNTING METHOD |
CLAMP RING AND STANDARD BUSHING |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
2 SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |