| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
TERMINAL SURFACES GOLD |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TURRET |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| ABPM |
BODY DIAMETER |
0.500 NOMINAL INCHES |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.375 INCHES NOMINAL |
| AFJN |
FRAGILITY FACTOR |
RUGGED |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.30 INCH-OUNCES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY QUALITY |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| AECZ |
MOUNTING LIP DIAMETER |
0.5000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.002 INCHES |
| ABPA |
UNDERCUT DIAMETER |
0.400 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
0.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| ABPC |
UNDERCUT WIDTH |
0.0630 INCHES NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 NOMINAL INCHES |
| ADAQ |
BODY LENGTH |
1.188 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEFZ |
SHAFT RUNOUT |
0.003 INCHES |
| TEST |
TEST DATA DOCUMENT |
32908-1740-0038 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ABWV |
SHAFT DIAMETER |
0.0932 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM |
| AEGA |
LATERAL RUNOUT |
0.003 INCHES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |
| AAVL |
PILOT DIAMETER |
0.3750 INCHES NOMINAL |