| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| AAVL |
PILOT DIAMETER |
2.8750 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TURRET |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AFJN |
FRAGILITY FACTOR |
RUGGED |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| ABHP |
OVERALL LENGTH |
1.968 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABPM |
BODY DIAMETER |
3.000 NOMINAL INCHES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-12934/5 GOVERNMENT SPECIFICATION |
| AEFK |
MAXIMUM STARTING TORQUE |
1.50 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AECZ |
MOUNTING LIP DIAMETER |
3.0000 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.2494 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 NOMINAL INCHES |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.1 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| ABPA |
UNDERCUT DIAMETER |
2.875 INCHES MAXIMUM |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ADAQ |
BODY LENGTH |
1.312 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.05/+0.05 SINGLE SECTION |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
6.0 7TH SECONDARY QUALITY |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |