| AEFP |
NONTURN DEVICE RADIUS |
0.313 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
1.120 INCHES NOMINAL |
| AEEA |
SWITCH TYPE |
ROTARY |
| AAPN |
SECTION QUANTITY |
1 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFL |
MAXIMUM RUNNING TORQUE |
21.00 INCH-OUNCES |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
-3.0/+0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0/+3.0 120 DEG CELSIUS SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
0.657 INCHES NOMINAL |
| CSDK |
SWITCH CURRENT TYPE AND RATING IN AMPS |
3.000 AC |
| ABNB |
FIRST FLAT LENGTH |
0.160 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEED |
SWITCH VOLTAGE RATING IN VOLTS |
28.0 |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY QUALITY |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| AEGH |
SWITCH OPERATING POSITION |
START OF ROTATION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFK |
MAXIMUM STARTING TORQUE |
21.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.200 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
PANEL SEAL AND SWITCH |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AEFM |
MAXIMUM STOP TORQUE |
56.00 INCH-OUNCES |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
266.0 MINIMUM AND 338.0 MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.300 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| APXH |
TERMINAL LOCATION |
REAR-BOTTOM |
| TEST |
TEST DATA DOCUMENT |
37695-228115 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEGJ |
SWITCH CONTACT ARRANGEMENT |
SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| ABPM |
BODY DIAMETER |
0.625 NOMINAL INCHES |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABNC |
FLAT HEIGHT |
0.109 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.440 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 TAB, SOLDER LUG |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
266.0 MINIMUM AND 338.0 MAXIMUM |