| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AEFY |
SHAFT END PLAY |
0.00500 INCHES |
| AJYN |
SCREW THREAD DIAMETER |
0.500 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ADAQ |
BODY LENGTH |
0.954 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TURRET |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| AEGC |
SHAFT RADIAL PLAY |
0.0015 INCHES |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 7TH SECONDARY QUALITY |
| CBME |
CUBIC MEASURE |
2.966 CUBIC INCHES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AGAV |
END ITEM IDENTIFICATION |
TEST SET |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UN |
| ABHP |
OVERALL LENGTH |
1.829 INCHES NOMINAL |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
+0.0/+130.0 SINGLE SECTION |
| ABPM |
BODY DIAMETER |
1.437 NOMINAL INCHES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFK |
MAXIMUM STARTING TORQUE |
1.60 INCH-OUNCES |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
354.0 NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
35351-747071 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AEGA |
LATERAL RUNOUT |
0.0025 INCHES |
| ADAV |
OVERALL DIAMETER |
1.437 INCHES NOMINAL |
| AEFZ |
SHAFT RUNOUT |
0.005 INCHES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.80 INCH-OUNCES |