| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AEFK |
MAXIMUM STARTING TORQUE |
0.70 INCH-OUNCES |
| ABXF |
SHAFT LENGTH |
1.000 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 MINIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CBME |
CUBIC MEASURE |
1.050 CUBIC INCHES |
| AEFM |
MAXIMUM STOP TORQUE |
48.00 INCH-OUNCES |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 7TH SECONDARY QUALITY |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.781 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAQ |
BODY LENGTH |
1.625 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0570 INCHES MINIMUM |
| ABPM |
BODY DIAMETER |
0.906 NOMINAL CENTIMETERS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-12934/6 GOVERNMENT SPECIFICATION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AECZ |
MOUNTING LIP DIAMETER |
0.8750 INCHES NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 NOMINAL INCHES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.60 INCH-OUNCES |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AAVL |
PILOT DIAMETER |
0.7500 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-1.0/+1.0 SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 MINIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |