| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
ZZZY |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
4.5 |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.093 NOMINAL INCHES |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AGAV |
END ITEM IDENTIFICATION |
PRESSURE DRAW |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
9000.0 NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.325 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
8.00 INCH-OUNCES |
| FEAT |
SPECIAL FEATURES |
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO3862 |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| TEST |
TEST DATA DOCUMENT |
14933-L03862 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CBME |
CUBIC MEASURE |
0.079 CUBIC INCHES |
| ADAT |
BODY WIDTH |
0.195 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 WIRE LEAD |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AEFK |
MAXIMUM STARTING TORQUE |
8.00 INCH-OUNCES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-10.0/+10.0 SINGLE SECTION |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| APXH |
TERMINAL LOCATION |
REAR END |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 7TH SECONDARY QUALITY |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.070 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |