| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-39002 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAPN |
SECTION QUANTITY |
1 |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 MINIMUM AND 305.0 MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-70.0/+70.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
3.5 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ADAQ |
BODY LENGTH |
0.650 INCHES MAXIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 6 OCLOCK |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AEFP |
NONTURN DEVICE RADIUS |
0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 7TH SECONDARY QUALITY |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CBME |
CUBIC MEASURE |
0.134 CUBIC INCHES |
| ABWV |
SHAFT DIAMETER |
0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
135.0 SINGLE SECTION |
| ABPM |
BODY DIAMETER |
0.485 NOMINAL MILS AND 0.515 NOMINAL CENTIMETERS |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEFL |
MAXIMUM RUNNING TORQUE |
6.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
295.0 MINIMUM AND 305.0 MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-39002/1 GOVERNMENT SPECIFICATION |