| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF AND SHAFT SEAL |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.095 NOMINAL MILS AND 0.105 NOMINAL CENTIMETERS |
| AAPN |
SECTION QUANTITY |
1 |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
C SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFM |
MAXIMUM STOP TORQUE |
48.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING AND TAB |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY QUALITY |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ABNB |
FIRST FLAT LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
0.250 INCHES MINIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
RECTANGULAR BUSHING MOUNTED |
| ADAQ |
BODY LENGTH |
0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
57045-D6001513-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CBME |
CUBIC MEASURE |
0.130 CUBIC INCHES |
| ABXF |
SHAFT LENGTH |
0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
5895-01-133-6600 COMMUNICATION CONTROL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| ABNC |
FLAT HEIGHT |
0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
245.0 MINIMUM AND 255.0 MAXIMUM |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFL |
MAXIMUM RUNNING TORQUE |
3.00 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEFK |
MAXIMUM STARTING TORQUE |
3.00 INCH-OUNCES |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
290.0 MINIMUM AND 300.0 MAXIMUM |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |