| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.185 NOMINAL MILS AND 0.215 NOMINAL CENTIMETERS |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| AAPN |
SECTION QUANTITY |
1 |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 MINIMUM AND 305.0 MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AEFM |
MAXIMUM STOP TORQUE |
64.00 INCH-OUNCES |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 7TH SECONDARY QUALITY |
| CBME |
CUBIC MEASURE |
0.244 CUBIC INCHES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR BUSHING MOUNTED |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-150.0/+150.0 SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.50 INCH-OUNCES |
| ADAU |
BODY HEIGHT |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
1.50 INCH-OUNCES |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
234.0 MINIMUM AND 246.0 MAXIMUM |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES NOMINAL |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
V SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| ADAP |
MOUNTING BUSHING LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |