| TEST |
TEST DATA DOCUMENT |
81349-MIL-PRF-39023 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0570 NOMINAL MILS AND 0.0670 NOMINAL CENTIMETERS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAVL |
PILOT DIAMETER |
0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.25 7TH SECONDARY QUALITY |
| ABXF |
SHAFT LENGTH |
0.188 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEGC |
SHAFT RADIAL PLAY |
0.001 INCHES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-PRF-39023/2 GOVERNMENT SPECIFICATION |
| AGAV |
END ITEM IDENTIFICATION |
C T 2 M-M RAD |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.40 INCH-OUNCES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABWV |
SHAFT DIAMETER |
0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0570 INCHES MINIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
0.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| ABPM |
BODY DIAMETER |
1.125 NOMINAL CENTIMETERS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.1 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ADAQ |
BODY LENGTH |
0.810 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
338.0 MINIMUM AND 342.0 MAXIMUM |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| ABPA |
UNDERCUT DIAMETER |
0.975 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CBME |
CUBIC MEASURE |
0.805 CUBIC INCHES |
| AECZ |
MOUNTING LIP DIAMETER |
1.0520 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |