| AAPN |
SECTION QUANTITY |
1 |
| CBBL |
FEATURES PROVIDED |
PANEL SEAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| AEFM |
MAXIMUM STOP TORQUE |
48.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-250.0/+250.0 SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-2.0/+2.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| ABPM |
BODY DIAMETER |
0.484 NOMINAL MILS AND 0.516 NOMINAL CENTIMETERS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
292.0 MINIMUM AND 298.0 MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
292.0 MINIMUM AND 298.0 MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ADAQ |
BODY LENGTH |
0.469 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
125.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CBME |
CUBIC MEASURE |
0.104 CUBIC INCHES |
| AGAV |
END ITEM IDENTIFICATION |
C-11300/SPA-25E CONTROLLER |
| APXH |
TERMINAL LOCATION |
REAR END |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 7TH SECONDARY QUALITY |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFP |
NONTURN DEVICE RADIUS |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
6.00 INCH-OUNCES |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 4'30 OCLOCK AND AT 10'30 OCLOCK |