| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| CBME |
CUBIC MEASURE |
0.315 CUBIC INCHES |
| AAPN |
SECTION QUANTITY |
1 |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFM |
MAXIMUM STOP TORQUE |
48.00 INCH-OUNCES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 MINIMUM AND 3610.0 MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEFP |
NONTURN DEVICE RADIUS |
0.305 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.25/+0.25 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEGB |
PILOT DIAMETER RUNOUT |
0.375 INCHES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR BUSHING MOUNTED |
| ABXF |
SHAFT LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| PKWT |
UNPACKAGED UNIT WEIGHT |
0.750 OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 KILOHMS SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AEFY |
SHAFT END PLAY |
0.014 INCHES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFL |
MAXIMUM RUNNING TORQUE |
2.00 INCH-OUNCES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AEGC |
SHAFT RADIAL PLAY |
0.005 INCHES |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
LOCKING BUSHING |
| AEFZ |
SHAFT RUNOUT |
0.006 INCHES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F111 |