| AEDA |
MOUNTING LIP DEPTH |
0.0570 NOMINAL MILS AND 0.0670 NOMINAL CENTIMETERS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ABPA |
UNDERCUT DIAMETER |
0.906 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TURRET |
| AAVL |
PILOT DIAMETER |
0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEGC |
SHAFT RADIAL PLAY |
0.001 INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-0.1/+0.1 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
7 OCLOCK ALL PRIMARIES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY QUALITY |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.40 INCH-OUNCES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-39023 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AXGY |
MOUNTING METHOD |
CLAMP |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0570 INCHES MINIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
0.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AGAV |
END ITEM IDENTIFICATION |
1440-01-215-4868 ARMAMENT SUBSYSTEM |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.1 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AECZ |
MOUNTING LIP DIAMETER |
0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ADAQ |
BODY LENGTH |
1.306 INCHES MAXIMUM |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ABPM |
BODY DIAMETER |
1.062 NOMINAL CENTIMETERS |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| AAVM |
PILOT LENGTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-39023/1 GOVERNMENT SPECIFICATION |
| CBME |
CUBIC MEASURE |
0.091 CUBIC INCHES |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |