| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 PERCENT, RATED AMPERES C AND BETTER |
| ADAP |
MOUNTING BUSHING LENGTH |
0.293 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
6 OCLOCK ALL PRIMARIES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFM |
MAXIMUM STOP TORQUE |
160.00 INCH-OUNCES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-0.1/+0.1 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 ALL SECTIONS |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-12934/32 GOVERNMENT SPECIFICATION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AGAV |
END ITEM IDENTIFICATION |
MG SET REGULA |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-1.00/+1.00 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
5.0 7TH SECONDARY AT 10'30 OCLOCK |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ADAQ |
BODY LENGTH |
4.094 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| ABPM |
BODY DIAMETER |
1.844 NOMINAL CENTIMETERS |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| ABXF |
SHAFT LENGTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AEFP |
NONTURN DEVICE RADIUS |
0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |