| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
251.0 MINIMUM AND 318.0 MAXIMUM |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF AND SHAFT SEAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| ABPM |
BODY DIAMETER |
0.844 INCHES MINIMUM AND 0.968 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-94 SPECIFICATION |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.360 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
251.0 MINIMUM AND 318.0 MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| CBME |
CUBIC MEASURE |
0.322 CUBIC INCHES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-94/4 GOVERNMENT SPECIFICATION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.0 KILOHMS SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEFM |
MAXIMUM STOP TORQUE |
128.00 INCH-OUNCES |
| AGAV |
END ITEM IDENTIFICATION |
AN/TYQ-23(V)1 |
| ADAQ |
BODY LENGTH |
0.391 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
-3.0/+0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 25 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 -25 DEG CELSIUS SINGLE SECTION AND +0.0/+3.0 120 DEG CELSIUS SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
6.00 INCH-OUNCES |
| AEFP |
NONTURN DEVICE RADIUS |
0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |