| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 MINIMUM AND 305.0 MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| ABXF |
SHAFT LENGTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
260.0 NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| ADAU |
BODY HEIGHT |
0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AEFM |
MAXIMUM STOP TORQUE |
68.00 INCH-OUNCES |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
RECTANGULAR BUSHING MOUNTED |
| AJYN |
SCREW THREAD DIAMETER |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR ALL SECTIONS |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ABNC |
FLAT HEIGHT |
0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.921 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AEFP |
NONTURN DEVICE RADIUS |
0.289 INCHES MINIMUM AND 0.321 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A ALL SECTIONS |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEFL |
MAXIMUM RUNNING TORQUE |
6.00 INCH-OUNCES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 ALL SECTIONS |
| ADAP |
MOUNTING BUSHING LENGTH |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABNB |
FIRST FLAT LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |