| AAQL |
BODY STYLE |
W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0025 |
| ADAT |
BODY WIDTH |
0.266 INCHES NOMINAL |
| CWJK |
CASE MATERIAL |
GLASS |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
500.0 DC SINGLE SECTION |
| ABKW |
OVERALL HEIGHT (NON-CORE) |
0.109 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABHP |
OVERALL LENGTH (NON-CORE) |
0.469 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
0.469 INCHES NOMINAL |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
100000.0 MEGOHMS |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
10000.0 MEGOHMS |
| CWQF |
QUALITY FACTOR AT REFERENCE TEMP |
1400.0000 |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
430.000 PICOFARADS SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
1.125 INCHES MINIMUM |
| ABMK |
OVERALL WIDTH (NON-CORE) |
0.266 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-11272/2 SPECIFICATION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CRTP |
TOLERANCE RANGE PER SECTION |
-1.00/+1.00 PERCENT SINGLE SECTION |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-25.0/+25.0 SINGLE SECTION |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
140.0 SINGLE SECTION |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |
| ADAU |
BODY HEIGHT |
0.109 INCHES NOMINAL |