| ABMK |
OVERALL WIDTH (NON-CORE) |
1.120 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
1.120 INCHES NOMINAL |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED MOUNTING HOLES |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
1000.000 PICOFARADS SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG |
| ABKW |
OVERALL HEIGHT (NON-CORE) |
0.330 INCHES NOMINAL |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
1500.0 MEGOHMS |
| ABJT |
TERMINAL LENGTH |
0.470 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
3000.0 DC SINGLE SECTION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.750 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
0.330 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
10000.0 MEGOHMS |
| CRTP |
TOLERANCE RANGE PER SECTION |
-2.00/+2.00 PERCENT SINGLE SECTION |
| AAQL |
BODY STYLE |
W/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.144 INCHES NOMINAL |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.312 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0008 |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-25/7 GOVERNMENT SPECIFICATION |
| ABHP |
OVERALL LENGTH (NON-CORE) |
2.190 INCHES NOMINAL |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |