| AAQL |
BODY STYLE |
W/MTG FLANGES, TERMINALS ON OPPOSITE ENDS |
| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00/+5.00 PERCENT SINGLE SECTION |
| AEBK |
MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS |
4.3 |
| AEBN |
LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
100.0 |
| AEBM |
MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS |
0.51 |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
2000.0 MEGOHMS |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
+0.0/+70.0 SINGLE SECTION |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
200.000 PICOFARADS SINGLE SECTION |
| AEBL |
HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
3000.0 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 FLANGE |
| ADAQ |
BODY LENGTH |
2.500 INCHES NOMINAL |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 70.0 DEG CELSIUS MAXIMUM |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
7500.0 MEGOHMS |
| ABPM |
BODY DIAMETER |
2.810 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-5+13 SPECIFICATION |
| AEBX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER |
3.250 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.260 INCHES MINIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED MOUNTING HOLES |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
6000.0 AC-PEAK SINGLE SECTION |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.3500 |