| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
94756-441-1060 DRAWING |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.1500 |
| ADAT |
BODY WIDTH |
0.190 INCHES NOMINAL |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
47.000 PICOFARADS SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.190 INCHES NOMINAL |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00/+10.00 PERCENT SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
10000.0 MEGOHMS |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
1000.0 MEGOHMS |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| ADAU |
BODY HEIGHT |
0.090 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
0.0 SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
200.0 DC SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |