| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.859 INCHES MINIMUM AND 2.891 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.812 INCHES MINIMUM AND 3.938 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.000 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.435 INCHES NOMINAL |
| AEBT |
TERMINAL DIAMETER |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
1.000 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 SOLDER STUD |
| AECE |
ANODE TYPE |
PLAIN FOIL |
| AAQL |
BODY STYLE |
W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| CWPN |
POWER FACTOR AT REFERENCE TEMP IN PERCENT |
30.000 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
3300.000 MICROFARADS SINGLE SECTION |
| CRTP |
TOLERANCE RANGE PER SECTION |
-20.00/+20.00 PERCENT SINGLE SECTION |
| CQLH |
DC LEAKAGE AT MAXIMUM OPERATING TEMP |
570.0 MICROAMPERES |
| ABMK |
OVERALL WIDTH |
1.000 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| CWJK |
CASE MATERIAL |
METAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.161 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
25.0 DC SINGLE SECTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED MOUNTING HOLES |
| AECQ |
ELECTRICAL POLARIZATION |
POLARIZED |
| ADAU |
BODY HEIGHT |
1.000 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
3.812 INCHES MINIMUM AND 3.938 INCHES MAXIMUM |
| CWNJ |
CAPACITIVE ELECTRODE MATERIAL |
TANTALUM |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |
| CWQH |
DC LEAKAGE AT REFERENCE TEMP |
95.000 MICROAMPERES |