| AAQL |
BODY STYLE |
W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE |
| ADAT |
BODY WIDTH |
1.844 INCHES MAXIMUM |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
-3.0/+5.0 SINGLE SECTION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
2.324 INCHES MINIMUM AND 2.364 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.362 INCHES NOMINAL |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
8000.0 MEGOHM-MICROFARADS |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
2700.000 PICOFARADS SINGLE SECTION |
| ABHP |
OVERALL LENGTH (NON-CORE) |
2.875 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 THREADED MOUNTING STUDS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 SOLDER STUD |
| ABMK |
OVERALL WIDTH (NON-CORE) |
1.844 INCHES MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.600 |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
350.0 MEGOHM-MICROFARADS |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00/+10.00 PERCENT SINGLE SECTION |
| ABKW |
OVERALL HEIGHT (NON-CORE) |
1.488 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.344 INCHES NOMINAL |
| CWJK |
CASE MATERIAL |
METAL |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| ABJT |
TERMINAL LENGTH |
0.300 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
20000.0 DC SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.844 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
2.875 INCHES MAXIMUM |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |