| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00/+5.00 PERCENT SINGLE SECTION |
| AEBN |
LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
100.0 |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED MOUNTING HOLES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
4000.000 PICOFARADS SINGLE SECTION |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
600.0 DC SINGLE SECTION AND 1000.0 DC SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.344 INCHES NOMINAL |
| AEBM |
MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS |
0.8 |
| AEBK |
MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS |
6.8 |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
-200.0/+200.0 SINGLE SECTION |
| AEBL |
HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
3000.0 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
10000.0 MEGOHMS |
| AAQL |
BODY STYLE |
W/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.144 INCHES NOMINAL |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.312 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
1.125 INCHES NOMINAL |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |